911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
3. Place wind deflector in vehicle.
- Before installing the wind deflector, check the flocking of the slides for wear. If the flocking is worn, replace the slides. Insert slides. Insert wind
deflector in guides from the front.
4. Fasten wind deflector in position.
- Attach the wind deflector to the slides using Torx M5 x 12 screws. Tightening torque 5.5 Nm (4 ftlb).
Adjustment
5. Adjust wind deflector.
- Loosen fastening nuts at left and right. Adjust the wind deflector in the slots so that it is flush with the (closed) lid for the sunroof and the cover
strips. Tighten the fastening nuts. Tightening torque 5.5 Nm (4 ftlb).