911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
Connecting Rod: Specifications
Dimensions
Connecting Rod Weight Group Specifications
The con-rods are allocated to weight classes. The last digit of the part number indicates the weight class. The last digit is marked on the shaft of
con-rods supplied as spare parts.
NOTE:
^
The weight difference between con-rods installed in the same engine must not exceed 6 g. To determine the weight class, weigh the entire con-rod
without the bearing shells.
^
The con-rod markings for spare parts are stamped with paint.
Type 1 and 2 con-rods are no longer available as spare parts. If con-rods need to be replaced, a complete set of type 3 con-rods must be
installed.
NOTE: Type 3 con-rods are also available as individual parts.
Type 1
From the start of 993 production