porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Warranty - Reporting OBDII Related Repairs|Page 891 > < Diagram Information and Instructions|Page 885
Page 1
background image

Emissions Maintenance Light: Technical Service Bulletins
Warranty - Reporting OBDII Related Repairs

911

9801

2470

Binder - Service Technical Bulletins 
This Bulletin replaces bulletin, Group 2, # 9503, dated 8-31-95.

Date: 8-21-98

Reporting OBD II Related Repairs

Models Affected:
All 1996 911 and 911 Turbo

As of Model Year 1996, all Porsche vehicles are equipped with On-Board Diagnostics, Version Two (OBD II). If a condition develops relevant to
exhaust emissions control, the "Check Engine" (MIL) warning light will illuminate. All information concerning the fault or faults will be stored in the
Fuel Injection ECM (DME).

If an OBD II equipped Porsche vehicle enters the workshop with the "Check Engine" light on, all information from the customer and the vehicle fault
memory must be gathered and written down on the attached OBD II report form. Screen prints from the System Tester 9288 can be attached if available.
This report, when completed, must be copied and sent or faxed to:

Porsche Cars North America, Inc. 
980 Hammond Drive, Suite 1000 
Atlanta, Georgia 30328
Attn. Technical Services

or

Fax:

(770) 290-3711

When submitting a claim for an 0BD II related repair, a copy of the completed 0BD II report form must be included in the documentation for the
warranty claim. An initial supply of forms is included with this bulletin. Additional forms may be ordered using the above mentioned telephone number.

Warranty - Reporting OBDII Related Repairs|Page 891 > < Diagram Information and Instructions|Page 885