911 GT2 (996) F6-3.6L Turbo (2003)
Antenna, Radio: Service and Repair
Removal
1. Remove the cover over the heating/air-conditioning system, battery and fluid tank.
2. Disconnect the antenna lead at the separation point. Just loosen the holder on the radio antenna (2 M5 x 12 screws).
3. Undo the wiper arm on the left and right and remove the cowl panel cover upwards over the wiper link.
4. Undo the radio antenna under the cowl panel cover and unclip it.
Installation
1. Clip in the radio antenna and fasten it with 2 screws.
2. Install cowl panel cover and wiper arms. Engage antenna lead and fasten holder on the radio antenna.
3. Install the covers over the heating/air-conditioning system, battery and fluid tank, and carry out a function test.