911 GT2 (996) F6-3.6L Turbo (2003)
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select 'Coding' in the PCM2-MMI function selection menu and confirm with the >> key.
-
Select 'Vehicle type coding' in the coding menu and confirm with the > key.
-
Select "911 Turbo (996)" and code with the F8 key.
-
Vehicle type vehicle
version
Using this menu item, you can code the PCM2-MMI according to the vehicle type:
-
Connect and start the Porsche System Tester II No. 9588, start and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control module menu and confirm with the >> key.
-
Select 'Coding' in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select "Vehicle type" in the PCM2 coding menu and confirm with the >> key.
-
Select appropriate vehicle type "Coupe, Cabrio, Targa" and code with the F8 key.
-
Right/left-hand drive
vehicle coding
Using this menu item, you can code the PCM2-MMI according to the vehicle type:
-
Connect and start the Porsche System Tester II No. 9588, start and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control module menu and confirm with the >> key.
-
Select 'Coding' in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select "Vehicle type coding right/left-hand drive" in the PCM2-MMI coding menu and confirm with the >> key.
-
Select 'Vehicle type coding right/left-hand drive' in the PCM2 coding menu and confirm with the >> key.
-
Select "Right/left-hand drive" from the menu, depending on the vehicle equipment, and code with the F8 key.
-
NDV (Noise-dependent
volume control)
Using this menu item, you can code the PCM2-MMI according to the noise-dependent volume control.
-
Connect and start the Porsche System Tester II No. 9588, start and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control module menu and confirm with the >> key.
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select "Coding" in the PCM2-MMI menu and confirm with the >> key.
-
Select "Coding" in the PCM2-MMI menu and confirm with the >> key.
-
Select 'GAL' in the PCM2 coding menu and confirm with the >> key.
-
Select "Value" in the menu according to the desired volume and code with the F8 key.
-
With/without
air conditioning
Using this menu item, you can code the PCM2-MMI according to the air conditioning equipment:
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control modules selection and confirm with the >> key.
-
Select 'PCM2-MMI' in the PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the PCM2-MMI menu and confirm with the >> key.
-
Select 'Air conditioning' in the PCM2-MMI coding menu and confirm with the >> key.
-
Select "Air conditioning with/without" in the PCM2-MMI coding menu item according to the equipment and code
with the F8 key.
-
Country coding
Using this menu item, you can code the country code:
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control modules selection and confirm with the >> key.
-
Select 'PCM2-MMI' in the PCM2 function selection and confirm with the >> key.
-
Select 'Coding' in the PCM2-MMI menu and confirm with the >> key.
-
Select 'Country coding' in the PCM2-MMI coding menu and confirm with the >> key.
-
Select "Relevant country coding" from the menu that is displayed and code it with the F8 key.
-
Main setup menu
-
PCM2 code
It is possible to encode the PCM2 code under this menu item after replacing the PCM2.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control modules selection and confirm with the >> key.
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection menu and confirm with the >> key.
-
Select 'Coding' in the PCM-MMI function selection menu and confirm with the >> key.
-
Select 'PCM2 code' in the PCM2-MMI coding menu and confirm with the >> key.
-
Take PCM2 code from IPAS and enter with the arrow keys and code with F8 key.