911 GT2 (996) F6-3.6L Turbo (2003)
2.3
Insert circuit board, Figure 6, A in lower part of the key housing.
Note!
Pay attention to the installation position of the circuit board.
2.4
Position upper part, Figure 6, item B of key housing and press together tightly with the lower part.
Note!
If the hand-held transmitter no longer operates after conversion, information and instructions as well as a resynchronization of the hand-held
transmitter can be found in the Workshop Manual 96 62 01 "Radio remote control in hand-held transmitter does not function".
2.5
Carry out function test.
Working Time
References
Disclaimer