911 GT2 (996) F6-3.6L Turbo (2003)
Brake Master Cylinder: Service and Repair
Removing and Installing Brake Master Cylinder
Removal
NOTE: The booster pump -1- remains fitted (installed) during removal and installation of the brake master cylinder.
1. Remove cover -A- from the hydraulic unit/brake unit.
2. Remove brake fluid from reservoir using suction.
3. Disconnect the electrical line (plug) on the reservoir.
4. Remove suction line of booster pump -2-.
5. Undo the brake lines on the brake master cylinder. Close the brake lines and the brake line connections with suitable plugs.