911 GT2 (996) F6-3.6L Turbo (2003)
4. Unscrew the hose clamp (a/f 7) between the air cleaner housing and the cowl.
NOTE: In order to avoid any damage when removing the intake pipes, pull off the connector.
5. Pull off the electrical connector on the solenoid hydraulic valve of the cylinder bank 1-3.
6. Undo pressure pipe -middle- by removing the spring clip -5-, hose clamp -3-, hexagon-head bolts -1 & 2- and electrical plug -4-.
7. Pull off vacuum hose to the control valve.
8. Unscrew fuel return line -1- and fuel supply line -2-. It is important to counter when performing this step.
9. Remove fuel filter.
10. Completely remove fuel filter with holder. To to this, bend the retaining clip upward as shown -arrow- and at the same time remove the filter with
holder.