911 GT2 (996) F6-3.6L Turbo (2003)
12. Undo fastening screw M 6 x 34 on the air cleaner housing.
13. Undo hose clamp between the air cleaner housing and intake manifold.
14. Tilt the complete air cleaner housing 90° upward and then remove from the engine compartment.
15. Pull off the connecting hoses between the charge air coolers and the pressure pipe:
-
Unclip the locking clips using a screwdriver and pull off the hose.
-
Then clip the locking clips in again.
-
Undo the right fastening screw on the refrigerant line.
16. Remove pressure pipe:
-
Disconnect connector on the temperature pressure sensor -arrow 4-.