911 GT2 (996) F6-3.6L Turbo (2003)
/f6-3.6l_turbo/Page-339003.png)
14. Install drive belt.
15. Check that the installation position of the drive belt on all drive wheels is correct. Check the installation position on the belt pulley from
underneath (use light source).
16. Install pressure pipe:
-
Push on vacuum hose to the control valve.
-
Fix connector onto the temperature pressure sensor.
-
Fasten pressure pipe with 2 spring band clamps, 1 screw-type hose clamp and 3 hexagon-head bolts (a/f 10, 10 Nm (7.5 ftlb.)).
17. Attach new O-rings onto both pressure hoses and coat the O-rings and take-up bores on the pressure pipe with plenty of water.
18. Push the right and left pressure hoses into the pressure pipe, until they audibly engage.
19. Make sure that the pressure hoses have been fitted correctly, by tipping and pulling on the pressure hoses.
