911 GT2 (996) F6-3.6L Turbo (2003)
Oil Cooler: Service and Repair
Removing And Installing Oil Cooler - Engine Removed
The following preliminary work must be carried out:
-
Remove and install oil container.
-
Remove intake distributor.
Removing Oil Cooler
1. Remove crankcase ventilation tube. Unscrew the two M6 screws -arrows- for this purpose.
2. Undo the union nut -arrow- and remove the crankcase ventilation tube.
3. Undo the holder behind the oil cooler. Unscrew the M6 screw -arrow- for this purpose.