911 GT2 (996) F6-3.6L Turbo (2003)
/f6-3.6l_turbo/Page-282007.png)
6. Connect the connector of the overrun air valve module -top arrow- and push on the two vacuum hoses -bottom arrow-.
7. Fasten the holder of the fuel return line. Position and tighten the M6 screw -arrow- for this purpose.
Tightening torque of M6 screw = 10 Nm (7.5 ftlb.)
8. Connect the three vacuum hoses -arrows- on the intake distributor.
9. Clip the vacuum line -arrow- on to the strain relief strut.
