911 GT2 (996) F6-3.6L Turbo (2003)
Control Assembly: Service and Repair
Removing Heating/Air Conditioning Control
NOTE:
-
Basic adaptation to the system must be performed with a new heating/air-conditioning control.
-
This is indicated by flashing of the displays for approx. 5 to 10 seconds each time the ignition is switched on.
-
Basic adaptation is performed during the system test.
1. Unclip cover.
2. Unscrew -fastening screws- (2 ea.) and pull the heating/air-conditioning control out of the dashboard.
3. Disconnect the electrical plug connections.