911 GT2 (996) F6-3.6L Turbo (2003)
1. Fit drive belt
-
Fit the belt onto the drive wheels.
2. Position servo pump wheel
1. Put on the servo pump wheel together with the drive belt.
2. Slightly tighten the three fastening screws on the servo pump wheel.
3. Tension drive belt
Note: It is absolutely necessary to check that the drive belt is correctly seated on all belt pulleys.
1. To tension the drive belt, turn the tensioning roller -7- in clockwise direction and simultaneously fit the drive belt on the deflection roller -8-.
2. Then slowly relieve. To do this, turn the tensioning roller slowly anti-clockwise.