911 GT2 (996) F6-3.6L Turbo (2003)
Coolant Line/Hose: Service and Repair
Removing and Installing Coolant Hose At Front Left (Y-Type Coolant Distributor)
Tools
Removal
1. Unscrew wheel bolts of the front left wheel.
2. Raise the vehicle at the prescribed support points.
3. Remove left front wheel. To do this, remove the wheel bolts and take the wheel off.
4. Remove front underbody cover.
5. Remove the front part of the left wheel housing liner.
6. Undo and remove the left diagonal brace between the body and the side member. To do this, unscrew the two fastening screws M 12 x 25
-(arrow)-.
NOTE: Pull off the complete flange on the radiator. Do not loosen the hose clamp.
7. Drain coolant. To do this, unclip the -locking spring- on the flange for the coolant hose and pull the coolant hose off. Approx. 5 liters of coolant
will pour out. Collect the coolant.