911 GT2 (996) F6-3.6L Turbo (2003)
-A- Optical contact, grey
-B- Optical contact, black
2. Close the secondary lock -arrow- and check for proper seating of the optical contacts.
Removing Optical Contacts On Bushing Side
1. Unlock and remove the spring cap on both sides using the press-out tool. Refer "Tools".
2. Remove the optical waveguide module from the plug.
3. Position the unlocking tool at the contact lock of the optical waveguide module and raise the lock.
-A- Optical contact, grey
-B- Optical contact, black