911 GT2 (996) F6-3.6L Turbo (2003)
14. Fasten the fuel collection pipe. Put on and tighten the two M6 screws -arrows- on the fuel collection pipe for this purpose.
Tightening torque of M6 screws = 10 Nm (7.5 ftlb.)
15. Connect the cable duct to the fuel collection pipe. Ensure correct seating.
NOTE: With all fuel lines, always counter with a second open-ended wrench.
16. Position and tighten the fuel line -5- (a/f 17 and 19) to the fuel collection pipe, cylinder bank 4 - 6.
Tightening torque 30 Nm (22 ftlb.)
17. Position and tighten the fuel supply line -4- (a/f 17 and 19).
Tightening torque 30 Nm (22 ftlb.)