911 GT2 (996) F6-3.6L Turbo (2003)
result.
Removal
1. Unscrew valve cap.
2. Undo fastening nut -2-. When undoing the fastening nut -2-, counter with a screwdriver in the valve toot. There is a slit in the valve foot to aid
countering. Remove disc -3- and O-ring -4-. Pull out valve -5-.
Installation
1. Insert valve -5- with the fitted foot seal -(6)- into the wheel. The foot seal -6- is always fitted with new valves.
2. Place O-ring -4- carefully on to the valve from the outside. Mount disc -3- in the correct position -arrow-. The O-ring then lies in the disc
depression.