911 GT2 (996) F6-3.6L Turbo (2003)
/f6-3.6l_turbo/Page-537001.png)
Clutch Slave Cylinder: Service and Repair
Removing and Installing Clutch Slave Cylinder
Component view
Removal
1. Raise vehicle on lifting platform. Disconnect battery.
2. Actuate the clutch pedal at least 25 times with the engine switched off so that the system is depressurised.
3. Undo the screws -arrows- and remove the front cross member.
4. Remove clips from the coolant lines.
