911 GT2 (996) F6-3.6L Turbo (2003)
6. Seal the coolant line by clamping it with special tool hose clamp No. VW3093 -A-.
7. Unscrew the transmission oil connecting line -A- between the oil cooler and the transmission on the transmission oil cooler.
8. Seal the coolant line by clamping it with special tool hose clamp No. VW3093 -B-.
9. Place a suitable container under the vehicle to collect the coolant-oil mixture from the transmission oil cooler.
WARNING: Coolant and transmission oil may emerge during the repair operations described below. With the engine at operating temperature,
there is a risk of scalding due to these liquids.
10. Undo the spring band clamp -A- and pull off the coolant hose.
11. Unscrew the holder screws -A- and the hexagon socket head bolt -B- and pull out the transmission oil cooler with the bracket.