porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4162 > < Initial Inspection and Diagnostic Overview|Page 4160
Page 94
background image

Gateway

The gateway is integrated in the CDR23. It is a fixed component of each CDR23. It provides a connection from CAN comfort to the MOST via its
nodes. Diagnostic and useful data is exchanged with the CAN via these nodes. It creates links to the following systems:

-

CAN comfort

-

Media Oriented Systems Transport (MOST), internal (electrical)

-

Single CD

-

Media Oriented Systems Transport (MOST), external bus (optical)

Identification

The diagnosis software number and the part numbers for the PCM2 can be read out under this menu item.

1. Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
2. Select '911 (996)' in the Vehicle type menu and confirm with the >> key.
3. Select 'PCM' in the Control units menu and confirm with the >> key.
4. Select 'CDR23' in the 911 (996) PCM2 function selection and confirm with the >> key,
5. Select 'Identification' in the 911 (996) CDR23 function selection and confirm with the >> key.
6. The message 'Diagnosis software number;  CDR23 part number.' appears on the display.

Actual Values

It is possible to read out the unlock counter under the 'Actual values' menu item.

Menu item

Function

-

Unlock counter

Under this menu item, it is possible to check the electrical and optical MOST during troubleshooting.
-

Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.

-

Select '911 (996)' in the Vehicle type menu and confirm with the >> key.

Initial Inspection and Diagnostic Overview|Page 4162 > < Initial Inspection and Diagnostic Overview|Page 4160