911 Targa (996) F6-3.6L (2004)
-
Increment steps
-
Key code
-
Tuner parameters
-
Status of the optical performance check
NOTE: Deactivate the automatic traffic announcement before performing the diagnosis on the CDR23. If this is not done, the system will crash.
Menu item
-
GAL (noise-dependent loudspeaker boost - NLB)
Function
You can read out the coded NLB value using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM2 function selection menu and confirm with the >> key.
-
Select Input signals in the 911 (996) CDR23 function selection menu and confirm with the >> key.
-
Select GAL (noise-dependent loudspeaker boost - NLB) in the 911 (996) CDR23 function selection menu and confirm with the >> key.
-
The current coded value is displayed in the 911 (996) CDR23 noise-dependent loudspeaker menu.
Menu item
-
Increment steps
Function
You can check the function of the CDR23 rotary knobs using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM2 function selection menu and confirm with the >> key.
-
Select Input signals in the CDR23 function selection menu and confirm with the >> key.
-
Select Increment steps in the 911 (996) CDR23 Input signals menu and confirm with the >> key.
-
The relevant change is displayed by turning the rotary knobs of the CDR23 if this functions correctly.
Menu item
-
Key code
Function
You can check the function of the CDR23 operating buttons using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Input signals in the CDR23 function selection and confirm with the >> key.
-
Select Key code in the 911 (996) CDR23 function selection and confirm with the >> key.
-
By operating the buttons of the CDR23, the correct function of each key code is displayed.
Menu item
-
Tuner parameters
Function
You can check the tuner parameters of the CDR23 using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM function selection and confirm with the >> key.
-
Select Input signals in the CDR23 function selection and confirm with the >> key.
-
Select Tuner parameters in the 911 (996) CDR23 Input signals function selection and confirm with the >> key.
-
The currently coded country code is displayed in the CDR23 Tuner parameters menu.
Menu item
-
Status of the optical performance check