911 Targa (996) F6-3.6L (2004)
Menu item
-
PCM2 code
Function
It is possible to code the PCM2 code under this menu item after replacing the CDR23.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select CDR23 in the Control modules menu and confirm with the >> key.
-
Select Coding in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select CDR23 code in the CDR23 coding function selection and confirm with the >> key.
-
Take the PCM2 code from IPAS, enter it using the arrow keys and code it with the F8 key.
Menu item
-
Production mode
Function
You can code the production mode using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select Production mode in the 911 (996) CDR23 coding function selection and confirm with the >> key.
-
Select Production mode ON/OFF in the CDR23 coding function selection and confirm with the F8 key.
Menu item
-
Tuner parameters
Function
You can code the tuner parameters using this menu item.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select Tuner parameters in the 911 (996) CDR23 coding function selection and confirm with the >> key.
-
Select the required tuner parameters in the CDR23 Modify coding function selection and confirm with the F8 key.
Menu item
-
Traffic broadcast loudspeaker boost
Function
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select CDR23 in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the 911 (996) CDR23 function selection and confirm with the >> key.
-
Select Traffic broadcast loudspeaker boost in the 911 (996) CDR23 coding function selection and confirm with the >> key.
-
Use the arrow keys to select the required traffic broadcast loudspeaker boost in the CDR23 Modify coding function selection and confirm with the
F8 key.
Modify Coding (PCM)
Modify Coding
The PCM can be coded on a country-specific basis with this menu item.
The following items can be set on an individual basis:
Vehicle model (LHD vehicle, RHD vehicle)
-
Language (driving instructions in German, English (GB/USA), French, Italian, Spanish)
-
Temperature (degree C, degree F)
-
Fuel consumption (l/100 km, mls/gal, mpg, km/l)