911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-964011.png)
-
MOST installed components list (required and actual installed components list) is analysed.
-
Start the ring break diagnosis.
-
The results are displayed by the Porsche System Tester II 9588.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select Cayenne in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select MOST system check (ignition on) in the Cayenne PCM2 MOST components check function selection and confirm with the >> key.
Diagnosis, open circuit in distribution line (ignition on.)
This check must only be carried out when the engine is not running.
Menu item
Diagnosis, ring break diagnosis (ignition on.)
Function
The ring break diagnosis carries out the following checks:
-
Gateway start-up condition is read out.
-
MOST installed components list (required and actual installed components list) is analysed.
-
Start the ring break diagnosis.
-
The results are displayed by the Porsche System Tester II 9588.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select Cayenne in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select Ring break diagnosis (top) in the Cayenne PCM2 MOST components check function selection and confirm with the >> key.
-
Follow the Tester instructions.
Optical performance check
Menu item
-
Optical performance check
Function
The optical performance check allows the performance of the MOST to be checked optically. The following checks are carried out automatically:
-
MOST installed components list (required and actual installed components list) is analysed.
-
External MOST components display.
-
Carrying out the performance check.
-
The result is displayed by the tester.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select Cayenne in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select Optical performance check in the Cayenne PCM2 MOST components check function selection and confirm with the >> key.
-
Follow the Tester instructions.
Data transmission check
Menu item
-
Data transmission check
Function
Using this menu item, the quality of the data transmission can be assessed. This is a counter which leads to an increase in the value if faults occur within
a certain time period. The check is carried out continuously at predetermined intervals.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select Cayenne in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select Data transmission check in the Cayenne PCM2 MOST components check function selection and confirm with the >> key.
MOST system check (with engine running)
