911 Targa (996) F6-3.6L (2004)
3. Remove air duct (A). The air duct is plugged in.
4. Detach diagnostic socket.
5. Detach relay carrier, unclip and lower into the footwell.
Note!
^
Continue with Step 11 for Tiptronic vehicles.
6. Release clutch pedal switch by turning it 90° and pull it out of the installation opening.
7. There is an assembly bore in the guide rod for the clutch boost spring. Insert a 3 mm [diameter] cotter pin in this bore, and bend over the ends
(securing: refer to Figure 478_98).
8. Remove pin between the clutch push rod and clutch pedal lever.