911 Targa (996) F6-3.6L (2004)
5. Fit the brake disc (right and left brake discs are the same part / exception GT3).
Notes only for 911 GT3
Do not confuse right and left brake discs during assembly.
Distinguishing characteristic: Involute shape and spare part number (SP No.).
The flat surface of the brake discs is marked with R = right or L = left.
Spare part on left-hand side third group number is odd
Spare part on right-hand side third group number is even
Example:
SP No. Left brake disc: 996.352.405.00
SP No. Right brake disc 996.352.406.00: - 911 GT3 brake disc
L left-hand side
6. Adjust the parking brake shoes and the parking brake cables. Fit the brake caliper. Tightening torque of the fastening screws: 85 Nm (63 ft. lbs.).
Ensure that the brake hose and brake line are in a perfect position.
Note!
^
Replace the brake caliper fastening screws after each removal.
On the 911 GT3, the brake caliper fastening screws on the front and rear axle are 5 mm longer than on the 911 Carrera (996). The screws are also
different colors.
911 GT3 = red (77 mm long)
911 Carrera (996) = silver (72 mm long).