911 Targa (996) F6-3.6L (2004)
Note;
-
The oil extraction pumps on the cylinder heads are identical parts. Therefore, the installation position and direction of rotation must be correct.
Installation position of oil extraction pump at cylinder head 1 - 3 (flywheel side). The arrow for the direction of rotation or the marking "1 - 3"
must face the crankcase. Fit oil extraction pump. Use new sealing ring and new micro-encapsulated hexagon socket head screws. Tightening
torque 10 Nm (7.5 ft. lbs.)
21. Fit camshaft closure cap dry.
22. Fit closure cap on tensioning element (VarioCam).
Tightening torque 10 Nm (7.5 ft. lbs.)