911 Targa (996) F6-3.6L (2004)
Initial tightening: 25 Nm (19 ft. lbs.)
Final tightening: 1 x 90° turn
1. Use special tool, assembly fixture 9607, for disassembly and assembly of the bearing housing, crankshaft and connecting rods of cylinder bank 4-
6.
Special tool 9607
2. Fasten bearing housing on the assembly fixture with two M10 x 20 hexagon-head bolts. Tighten hexagon-head bolts only slightly.
3. Additionally fasten the assembly fixture on the workbench using C-clamps.
4. Place and fasten the bearing housing half of cylinder bank 4 - 6 on the special tool for assembly.