911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-261005.png)
1. Fasten crankcase half, cylinders 1 - 3, in conjunction with mounting elements 9590 to engine holder 9589.
2. Clean bearing housing support surface, particularly in area of oil duct. Check dowel sleeves for correct seating.
3. Installation of the complete bearing housing in the crankcase half, cylinders 1 - 3. As the bearing housing is heavy, it should be installed using a
workshop crane.
Carefully and in stages, lower bearing housing with fitted holder 9607 and using a workshop crane towards the dowel sleeves (2 ea.), observing the
following points:
