911 Targa (996) F6-3.6L (2004)
in the intermediate flange.
Screw in new micro-encapsulated hexagon-head bolts M6 x 20 (3 ea.).
Tightening torque 10 Nm (7.5 ft. lbs.).
Tighten lock nut with the socket wrench, special tool 9110. For this purpose, hold with a slotted screwdriver 7.9 x 1.1 at the slotted threaded pin.
Tightening torque 11 Nm (8 ft. lbs.).
39. Fit belt pulley.
Note;
^
Check whether there are foreign objects in the drive belt grooves of the belt pulley and remove them if necessary.
Tighten hexagon-head bolt using the socket wrench insert 9594; simultaneously hold with retaining device 9593.
Tightening torque 50 Nm (37 ft. lbs.)
Tightening sequence
Initial tightening 50 Nm (37 ft. lbs.)
Final tightening 1 x 90° turn