porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Housing Assembly HVAC|Locations|Page 3690 > < Housing Assembly HVAC|Locations|Page 3688
Page 2
background image

12. Remove the front cover of the center console. Undo the fuse holder and diagnosis plug in the left footwell.
13. Loosen dashboard on the bottom, centre, left and right. Carefully remove the dashboard and detach the loudspeaker cable.

14. Loosen centre tunnel support at the top of supporting frame and loosen bottom tunnel holder.

15. Remove the left air guide. Only loosen the defrost channel. Undo and remove the center air distributor casing.
16. Disconnect the central plug connections (2 ea.) from the heater/air-conditioning unit.
17. Loosen battery positive connection at the current distributor and current distributor at the firewall cover.

18. Clamp shut both heater hoses in front of the heat exchanger with a commercially available hose clamp. Disconnect the heating hoses on the heat

exchanger and plug the connections.

19. Undo heater/air-conditioning unit on the lid firewall (3 nuts). Pull off the water drainage hose from the heater/air-conditioning unit.
20. Undo holder of the heater/air-conditioning unit from the passenger's side at the top right.

21. Carefully lower and remove the heater/air-conditioning unit downwards into the footwell. Do not damage the electrical plug connections or cables.

Installation

1. Ensure that the air distributor casing and air guides are correctly positioned. Engage the electrical plug connections and carefully lay the electrical

Housing Assembly HVAC|Locations|Page 3690 > < Housing Assembly HVAC|Locations|Page 3688