911 Targa (996) F6-3.6L (2004)
4. Turn lamp fastener counter-clockwise (bayonet lock) and remove with the gas discharge lamp.
Installing gas discharge lamp (Xenon headlights)
1. Install new gas discharge lamp. Position lamp fastener -(lower arrow)- and turn to the right.
2. Engage electrical plug connection.
3. Close cap and secure with fastening screws.
4. Install main headlight and perform a function test.
Auxiliary Headlight Bulb (High Beam)
NOTE: The bulb for auxiliary headlights (high beam headlight/headlight flasher) is located beneath the gas discharge lamp for dipped beam/high beam
headlight!
1. Switch off light. Remove main headlight.
2. Unscrew fastening screws (2 ea.) and open rear closure cap. Unscrew bulb for the auxiliary headlight (bayonet lock).
3. Release and disconnect electrical connection of the defective bulb.