porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 5859 > < Procedures|Page 5857
Page 2
background image

4. Install main headlight and perform a function test.

Removing and Installing Gas Discharge Lamp (Litronic Headlights)

Removing And Installing Gas Discharge Lamp (Litronic Headlights)

WARNING:  Warning signs (yellow triangle with black high-voltage arrow) indicate high voltage (risk of fatal injury).

-

When changing a bulb, the light must always be switched off before the headlight is opened. Once removed, a headlight is not under high
voltage.

-

The gas discharge lamp (D2S lamp) may only be operated when installed in the reflector and with the headlight installed.

-

Gloves must be worn for changing bulbs. Do not touch the glass bulb.

Removal

1. Switch off the light. Release the headlight housing and pull out forwards slightly.
2. Disconnect the electrical plug connection of the automatic headlight beam adjustment and remove the headlight housing.
3. Release and open the cover with control module. Unscrew the electrical plug connection on the gas discharge lamp (bayonet lock).
4. Rotate lamp fastening anti-clockwise (bayonet lock) and remove together with the gas discharge lamp.

Installation

1. Install a new gas discharge lamp. Lock the cover with control module and insert the headlight housing in the wing.
2. Engage the electrical plug connection of the automatic headlight beam adjustment and lock the headlight housing in the wing.
3. Carry out function check of the headlights.

Removing and Installing Gas Discharge Lamp (Xenon Headlights) As From Model Year '02

Removing And Installing Gas Discharge Lamp (Xenon Headlights) As From Model Year '02

WARNING:  Danger of injury from high voltage.

-

The light should always be switched off when the components (control module, gas discharge lamp, drive motor) are removed and
installed.

-

The gas discharge lamp (D2S lamp) should only be operated when installed in the reflector and in the installed headlight.

-

A removed headlight does not have a high voltage.

-

Gloves must be worn when changing the lamp.

-

Do not touch the glass bulb.

Removing gas discharge lamp (Xenon headlights)

1. Switch off light. Remove main headlight.

Procedures|Page 5859 > < Procedures|Page 5857