911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-145001.png)
Alignment: Specifications
Adjusting Values For Suspension Alignment - 911 Carrera 4S
Vehicle Height
Vehicle height
Note!
^
The following values relate to the empty weight, i.e. full fuel tank, vehicle with spare wheel/collapsible wheel and tools, but without driver and
without additional weights!
^
The 911 Carrera 4S is delivered with just one running gear tuning!
Wheel Alignment Values
Wheel alignment values
Warning! Danger of injury and damage to property due to malfunctions in the PSM control range if the steering angle sensor is not
calibrated or is calibrated incorrectly!
^
Calibrate steering angle sensor with wheels in straight-ahead position with the Porsche System Tester 2!
^
The steering angle sensor actual value must be checked after a suspension alignment where no changes were made to the wheel alignment
values!
Note!
^
The following values relate to the empty weight, i.e. full fuel tank, vehicle with spare wheel/collapsible wheel and tools, but without driver and
without additional weights!
^
A caster adjustment is normally not necessary and is therefore not present!
^
The toe-difference angle value is also influenced by the vehicle height! For this reason the measured result must be evaluated accordingly! No
action is necessary in the case of small deviations from the toe-difference angle required value, as long as the value to the right and the left is
almost the same!
