911 Targa (996) F6-3.6L (2004)
Fluid - A/T: Service and Repair
Replacing ATF (As of MY 2002)
Replacing ATF
Replacing ATF
Note!
^
Top up only with ATF approved by Porsche.
Filling capacity: approximately 9.0 liters
Change quantity: approximately 4.5 liters
1. Place oil collection pan under the transmission.
2. Unscrew drain screw -A- and drain ATF.
Note!
^
Without ATF, the engine must not be started and the vehicle must not be towed.
3. Replace sealing ring for drain plug and tighten screw.
Tightening torque: 22 Nm (16 ft. lbs.)
4. Unscrew control screw -B-.
Note!
^
To undo and tighten the cap nut for the charging valve, counter with an open-ended wrench.
5. Screw off cap nut for the charging valve.