911 Targa (996) F6-3.6L (2004)
NOTE: Without ATF, the engine must not be started and the vehicle must not be towed.
3. Replace sealing ring for drain plug and tighten screw.
Tightening torque: 20 Nm (15 ftlb.)
4. Unscrew control screw -B-.
NOTE: To undo and tighten the cap nut for the charging valve, counter with an open-ended wrench.
5. Screw off cap nut for the charging valve.
6. Screw connection hose 9507/1 -A- onto charging valve. Top up with ATF via the charging valve until surplus ATF runs out at the control screw
bore.