911 Targa (996) F6-3.6L (2004)
Fusible Link: Service and Repair
Removing And Installing Fusible Element In The Current Distributor
Removing fusible element from the current distributor
DANGER:
-
Danger of injury and risk of damage.
-
The battery must be clamped off before starting the assembly work.
1. Remove cover for current distributor and remove the service label.
2. Carefully lever off the cover -A- , e.g. with a screwdriver -arrow-. This will break the locking tabs and the cover can be removed.
3. Remove the broken locking tabs from the current distributor.
4. Unscrew the two hexagon nuts M 5 -3- from the blown fusible element -1- and remove with the washers -2-.
Installing fusible element in the current distributor
NOTE: The following spare parts must be replaced.
Hexagon nut M 8, 1 piece
Repair kit - replacement fusible element