911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-415002.png)
3. Unscrew both M6 pan-head screws (hexagon socket a/f 5) -Item 2 in the previous Figure- of the valve holder and remove the holder with the
screws -A-.
4. Remove retainer plate with integral seal -3- from the valve.
5. Carefully pull the hydraulic valve out of the cylinder head using special tool (relay puller) No. 9235.
Installing Hydraulic Valve For Camshaft Adjustment
