porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Checking Fuel Pressure - Fuel System Without Return Line, - As of MY 2002|Page 2088 > < Fuel Pressure|Specifications
Page 1
background image

Fuel Pressure: Testing and Inspection
Checking Fuel Pressure - Fuel System Without Return Line, - As of MY 2002

Checking Fuel Pressure - Fuel System Without Return Line, - As Of MY 2002

WARNING:  Observe the general safety instructions when working on the fuel system and when handling petrol and other fuels.

Attach or mount a warning notice on the vehicle in a clearly visible position -see Figure-.

Warning notice on 996 engine compartment lid

NOTE:  The battery voltage may not fall below 12 volts during the fuel pressure check.

1. Check the battery charging condition e.g. using a voltmeter or the Porsche System Tester. The battery voltage may not fall below 12 volts during

the check.

NOTE:  Use the brass closure cap on the test connection of the fuel supply line only once as the sealing ring cannot be replaced. To avoid possible
leaks, the cap must be replaced after removal.

2. Release the metal cap on the fuel collection pipe and screw it off by hand (a/f 13 mm).

Checking Fuel Pressure - Fuel System Without Return Line, - As of MY 2002|Page 2088 > < Fuel Pressure|Specifications