porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 301 > < Initial Inspection and Diagnostic Overview|Page 299
Page 87
background image

Voice Control System (VOCS)

The VOCS is designed as a module box which can be pushed into the PCM2 (optional). After the insertion, an electronic switch is opened and the
module is integrated into the MOST ring.

Drive Links

Drive links of the navigation module can be activated with this menu item. This allows the function of the drive links to be assessed very quickly.

The following drive links can be activated with the Porsche System Tester II No. 9588:

-

Count CD sectors

-

GPS position

-

Wheel pulse counter

-

Self-test

-

Set default values

NOTE:  The activated drive link is automatically switched off after approximately 20 seconds.

PCM2 Control Module (Head Unit)

The PCM2 control module (head unit) includes the following  components:

-

Internal:
PCM2 gateway
PCM2 Man Machine Interface (MMI)
Amplifier (internal)
Tuner
Single CD
Navigation (optional/insertion)
VOCS (voice control system) (optional/insertion)
Wake-up control and control for diagnosis of open circuit in distribution line
Controller Area Network (CAN) Comfort
MOST switch

-

External:
External amplifier (optional, Harman or BOSE)
Telephone/telematics (optional)
CD changer (CDC), (optional)

The PCM2 consists of at least two but a maximum of four MOST nodes, (Gateway, MMI and Navigation and VOCS (optional)), which
communicate with each other via the electronic MOST. Data is transferred outside of the PCM2 via the optical MOST.

Unlock Counter

Interruptions occur in the system if perfect communication is no longer possible. If the relevant threshold values are exceeded, an entry is recorded in the
appropriate control module and the 'unlock counter' is incremented.

Telephone/Telematics

The telephone/telematics feature is available as an option and is linked to the PCM2 via the optical waveguide.

Tuner

The tuner is part of the PCM2 (on the main board).

External Amplifier

The external amplifier (Harman or BOSE) is available as an optional feature and is linked to the PCM2 via the optical waveguide.

Internal Amplifier

The internal amplifier is part of the PCM2 (installed on the main board).

Wake-up Function

Initial Inspection and Diagnostic Overview|Page 301 > < Initial Inspection and Diagnostic Overview|Page 299