911 Targa (996) F6-3.6L (2004)
Menu item
-
Right/left-hand drive vehicle coding
Function
Under this menu item, the PCM2 MMI corresponding to the vehicle version can be coded.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control module menu and confirm with the >> key.
-
Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the >> key.
-
Select Right/left-hand drive vehicle coding in the PCM2 MMI coding function selection and confirm with the >> key.
-
Select Right/left-hand drive vehicle coding in the Modify PCM2 coding menu and confirm with the >> key.
-
Select Right or left-hand drive in the menu corresponding to the vehicle equipment and code with the F8 key.
Menu item
-
GAL (noise-dependent loudspeaker boost - NLB)
Function
Using this menu item, you can code the NLB as required.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the PCM2 MMI function selection and confirm with the >> key.
-
Select NLB in the PCM2 coding function selection and confirm with the >> key.
-
Select Value corresponding to the desired volume and code with the F8 key.
Menu item
-
Country coding
Function
Using this menu item, you can code the country code.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select PCM2 MMI in the PCM2 function selection and confirm with the >> key.
-
Select Coding in the PCM2 MMI function selection and confirm with the >> key.
-
Select Country coding in the PCM2 MMI coding function selection and confirm with the >> key.
-
Select the relevant country coding from the menu displayed and code it with the F8 key.
Menu item
-
Main set-up menu
-
PCM2 code
Function
You can use this menu item to code the PCM2 code after replacing the PCM2 GW.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select PCM2 MMI in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the 911 (996) PCM2 MMI function selection and confirm with the >> key.
-
Select PCM2 code in the PCM2 MMI coding function selection and confirm with the >> key.
-
Take the PCM2 code from IPAS, enter it using the arrow keys and code it with the F8 key.
Menu item
-
Porsche Assistance, international designation
Function
Using this menu item, you can code the Porsche Assistance, international designation as appropriate.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.