911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-849003.png)
2. Insert electrical lead -3- and press it into the metal clip -6-.
INFORMATION: The electrical lead -3- must not be routed too tightly around the seat cushion. Check that the lead is free of tension by moving
the belt lock back and forwards.
3. Press electrical lead -3- into the metal clips -5-.
4. Secure the electrical lead -3- around the cushion carrier using a tie-wrap -4-.
5. Insert electrical lead -3- into the plug -1-.
6. Slide the cover -2- onto the plug -1- in the direction of the arrow -A-.
