911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-66002.png)
7. If a control module with parking assistant is installed, remove the bracket. To do so, unscrew the two fastening screws -arrow- and disconnect both
plugs.
8. Remove the alarm system control module.
9. Disconnect the plug of the alarm control module, open the plug -A- and pull out the pin strip -B-.
10. Remove pins 38 and 11 with the press-out tool 90207, insulate the lead and tie it to the wiring harness.
