911 Targa (996) F6-3.6L (2004)
4. Push in the locating peg -1- of the support and check that it is sitting correctly.
5. Tighten the fastening nuts -3- and the fastening screws -2-. Tightening torque -2- 7.2 Nm (5.5ftlbs.).
6. Lay the floor covering over the support and engage.
Using the Porsche System Tester, read out any faults present in the POSIP menu and erase. Refer to Diagnose/airbag troubleshooting.
Insert sill. Refer to Removing and installing inner sill (driver's side) - as of model year 2001.
Mount the side lining at rear. Refer to Removing and installing side-panel lining.
Installing front seat. Refer to Removing and installing front seat.
Tools