911 Targa (996) F6-3.6L (2004)
Transmission Speed Sensor: Service and Repair
Removing and Installing Sensor For Transmission Input Speed
Removing and installing sensor for transmission input speed
Note!
^
Do not reuse speed sensors that have been dropped (permanent magnet breaks).
Removal
1. Remove hydraulic control unit.
2. Remove sensor.
1
Sensor
2
Spacer sleeves (height 20 mm)
Installation
1. Using the two spacer sleeves, install sensor and tighten fastening screws to 6 Nm (4 ft. lbs.).