911 Targa (996) F6-3.6L (2004)
2. Screw in fastening screw -B-, position battery and tighten the fastening screw. Tightening torque: 23 Nm (17 ft.lb.)
3. Push on venting hose -A-.
4. First connect the positive cable then the negative - otherwise there is a danger of a short-circuit.
Tightening torque: 5 Nm (4 ft.lb.).
5. Put on the battery cover and lock with the turn-lock fasteners.
6. Carry out work instructions after disconnecting the battery.