911 Targa (996) F6-3.6L (2004)
Steering Wheel: Service and Repair
Installation
Installation
1. Refit the steering wheel with the wheels in the straight-ahead position or in accordance with the marking so that the upper spokes of the steering
wheel are horizontal. Caution: Do not trap the cable of the contact unit.
2. Fit hexagon nut with spring washer and tighten to 46 Nm (34 ft. lbs.).
3. Install driver's airbag unit. Use new fastening screws. Tightening torque: Tightening torque 10 Nm (7.5 ft. lbs.)
4. Check horn for operation.