911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-751002.png)
hold it with special tool 9546 (Torx screwdriver).
Note!
^
Do not damage the boot of the ball joint when pressing off the ball joint. If necessary, coat the boot and the ball joint extractor with tire
mounting paste.
11. Loosen the outer ends of both upper arms and remove the screws.
12. Remove the ball joint from the control arm (lower arm). For pressing off the ball joint, use special tool 9560.
13. Loosen the spring strut on the wheel carrier (arrow) and remove the wheel carrier.
