911 Targa (996) F6-3.6L (2004)
Disassembling and assembling front spring strut - GT3
Disassembly and assembly instructions
Disassembly
-
If necessary, tension the coil spring with the spring clamp until the piston rod is relieved.
-
To undo the connection (piston rod to spring strut mount) counter at the piston rod with a 7-mm Allen key. Important: Never use an impact bolter
to loosen or tighten the fastening nut.
-
Remove all parts from the piston rod.
Preliminary work and notes on assembly
-
Replace nut for fastening the piston rod on the spring strut mount.
-
Grease thread of the piston rod with Optimoly HT (copper grease/only at the front axle).
Note!
^
If the vibration damper is to be replaced, set the height adjusting nut No. 2 to the same position as on the old vibration damper (transfer the