911 Targa (996) F6-3.6L (2004)
Differential: Adjustments
Determining Disc Thickness S3
Determining disc thickness S3
1. Push spacer sleeve and fixed wheel for 3rd gear on to the output shaft. The narrow collar faces the tensioning plate.
2. Shift into 4th gear.
3. Block the input shaft with special tool retaining device 9253.
4. Push special tool assembly sleeve 9263 -A- and discs (Part No. 950.302.296.03) -B- on to the output shaft.
5. Screw collar nut on to the output shaft.
Tightening torque: 300 Nm (222 ft. lbs.)
6. Set the setting collar on special tool measuring mandrel VW 385/1 to the dimension a (approximately 65 mm).
7. Complete the measuring mandrel as shown in the illustration.
8. Read off the installation dimension E from the crown wheel.
1
Installation dimension E
2
Backlash F
3
Matching number
Example: E = 70.20 mm
9. Set the installation dimension E on special tool universal master gauge VW 385/30 and set the dial gauge to 0 with 2 mm pretension.
10. Place special tool adjusting shim 9281 on the pinion head of the output shaft.